Scanning Procedures - Canon CanoScan FB 1200S User Manual

Scanning Procedures

Although scanning procedures vary for each image mode (color, grayscale or black
and white), the basics are the same. Use the following procedures as a guideline.
Each step is explained in greater detail on the referenced pages.
(1) Place the film on the scanner platen.
Prepare the scanner and Film Adapter Unit and position the film.
(2) Set the film type.
Select a film type matching the film you are scanning.
(3) Set the image mode.
Select between [24-Bit Color] and [36-Bit Color] for the color
mode, between [8-Bit Grayscale] and [12-Bit Grayscale] for the
grayscale mode, and [Black and White] for the black and white
mode.
(4) Preview all the frames.
Initiate a preview scan of all the film frames on the scanner
platen to confirm their positions.
(5) Select one or more frames.
(6) Adjust the trimming frames.
Adjust the positions and sizes of the trimming frames to the
selected images.
(7) Preview the images.
Preview the selected images (frame by frame).
(8) Set the scan settings.
Set the resolution, output target and image size according to the
purpose of the scanned image (frame by frame).
(9) Adjust the brightness and coloring.
If the image requires adjustment, adjust the color balance and
brightness of images scanned in color mode, the brightness of
images scanned in grayscale mode and the threshold value of
images scanned in black and white mode (frame by frame).
(10) Select the scan area.
Drag the mouse cursor to select the scan area if you wish to crop
the image (frame by frame).
(11) Initiate the final scan.
Scan all the selected frames and display the images in the
window of the application program from which FilmGet FAU was
started. Use the application program to print or save the images.
See p. 33.
See p. 34.
See p. 36.
See p. 37.
See p. 39.
See p. 41.
See p. 46.
See p.
See p. 63.
See p. 64.
FilmGet FAU User's Guide
Scanning
See p. 32.
62.
31