Canon CanoScan FB 1200S User Manual page 70

Reset Buttons
There are two reset buttons: one inside each tab and one at the
bottom of the dialog.
Reset Button inside Tab
Reset All Button at Bottom
• Reset Button inside Tab
• Reset All Button at Bottom
RGB Values Display
This display shows the color values for the area of the preview image
under the mouse cursor. The values are displayed in the 'XXX/YYY'
format, where 'XXX' represents the original color values and 'YYY'
represents the adjusted color values.
70
FilmGet FAU User's Guide
This button resets all the settings in the particular tab to the default
values. If the tab has channel settings, this button only resets the
default values for the selected channel.
This button resets all the settings for all the adjustment modes to
the default values.
Click this button to load a settings file that has been
previously saved.
You can save settings in a file for future reuse if you
are going to rescan the same image. The files are
saved with the following extensions depending upon
the image mode.
36-Bit and 24-Bit Color
12-Bit and 8-Bit Grayscale [filename.adg]
Black and White [filename.adb]
[filename.adc]