Specifying Scangear Toolbox Cs Appearance; Cleaning Up Temporary Files - Canon CanoScan FB 1200S User Manual

CONTENTS
GLOSSARY
INDEX

Specifying ScanGear Toolbox CS Appearance

You can specify if you want ScanGear Toolbox CS to appear in the Taskbar
when it is minimized.
To specify ScanGear Toolbox CS icon location:
1. Click the Preferences tab.
2. Select On Minimize Appear in Task Bar.
• If this option is selected, the ScanGear Toolbox CS will remain available
• If this option is cleared, the ScanGear Toolbox CS icon appears in the
3. Click OK.

Cleaning Up Temporary Files

You can specify how you want ScanGear Toolbox CS to dispose of the
temporary files created during the scanning session. You can also delete
temporary files immediately.
To specify how to clean up temporary files:
1. Click the Preferences tab.
2. Under File clean-up, select one or more of the following options:
• If you select On Close Delete ScanGear Temp Files, ScanGear CS-S
• If you select Warn Before Deleting, ScanGear Toolbox CS asks before
3. Optionally, click Delete now to delete temporary files immediately.
4. Click OK.
for reactivation if you press Alt-Tab.
status indicator, and you must click it or right-click it to open the
ScanGear Toolbox CS bar.
deletes the temporary files when you close ScanGear Toolbox CS.
deleting files.
Using ScanGear Toolbox CS-S
Chapter 6
87
87