Starting Scangear Toolbox Cs; About The Scangear Toolbox Cs Bar - Canon CanoScan FB 1200S User Manual

CONTENTS
GLOSSARY
INDEX
4. Click the [Open the Add/Remove Programs dialog] button at the bottom
right. The Windows Add/Remove Programs Properties dialog will display.
Select [ScanGear Toolbox CS] and click the [Add/Remove] button.
Follow the on-screen instructions to complete the procedure.

Starting ScanGear Toolbox CS

When ScanGear Toolbox CS is installed, click the Start button; point to
Programs, point to Canon ScanGear Toolbox CS, and click Canon ScanGear
Toolbox CS.
Or, simply push the Start button in front of the CanoScan FB1200S to launch
ScanGear Toolbox CS on your computer.

About the ScanGear Toolbox CS Bar

The ScanGear Toolbox CS bar is a window with a set of tool buttons and
other configuration options. You can add or remove the Toolbox buttons by
clicking the Settings button and changing the settings for each tool. The Fax,
Mail, and Copy buttons are preset. There are four additional buttons you can
add to the ScanGear Toolbox CS bar: one edit and three custom buttons.
The Easy Acquire check box lets you scan an image without opening the
ScanGear CS-S window. When the Easy Acquire check box is selected, and
you click a button in the ScanGear Toolbox CS bar, the scan occurs
automatically, using the default settings.
When Easy Acquire check box is cleared, and you click a button in the
ScanGear Toolbox CS bar, ScanGear CS-S opens and lets you configure the
scanning settings manually before scanning.
The ScanGear Toolbox CS bar, before you add or remove buttons, looks like
this:
When Easy Acquire is selected, you
don't see the ScanGear CS-S
window and the image is acquired
and processed automatically.
Using ScanGear Toolbox CS-S
Open the
online help.
Click to add and delete buttons from
the ScanGear Toolbox CS bar, and
configure settings for each button.
Chapter 6
72
72