Linking A Mail Application - Canon CanoScan FB 1200S User Manual

CONTENTS
GLOSSARY
INDEX

Linking a Mail Application

The Mail tab contains the settings to configure ScanGear Toolbox CS for use
with an e-mail application.
To link ScanGear Toolbox CS to a mail application:
1. On the Mail tab, select an option in the Link To list.
• If you select System Default, the Toolbox button is linked to the mail
• If you select Application, click Browse to locate and select the mail
2. Select an Image Type.
3. Select an Image Quality.
4. Select an Output File Format.
5. Click OK.
Showing the Mail Button on the ScanGear Toolbox CS Bar
Select the Show This Button check box to display the Mail button on the
ScanGear Toolbox CS bar. If this check box is cleared, the Mail button does
not appear on the Toolbox bar.
Note:
application that was set as the system default when you installed
ScanGear Toolbox CS. If no system default mail application was
selected during installation, the system default option is unavailable.
application executable to link, then click Link.
If no application .exe has been linked using the previous
procedure, the Show This Button option is disabled.
Using ScanGear Toolbox CS-S
Chapter 6
79
79