4.
LSI MegaRAID or Intel RSTe selection jumper (3-pin RAID_SEL1)
This jumper allows you to select the PCH SATA RAID mode to use LSI
MegaRAID software or Intel
Place the jumper caps over pins 1–2 if you want to use the LSI MegaRAID
software RAID Utility (default); otherwise, place the jumper caps to pins 2–3
to use the Intel
5.
ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to quickly recover the Intel Management Engine (ME)
firmware when it becomes corrupted.
ASUS Z9PH-D16 Series
®
Rapid Storage Technology enterprise 3.0 RAID.
Rapid Storage Technology Enterprise Option ROM Utility.
®
2-23