6.
Insert the Red Hat
select OK, then press <Enter>.
Insert your driver disk into /dev/sdb
and press "OK" to continue.
The drivers for the RAID card are installed to the system.
When asked if you will load additional RAID controller drivers, select No, then
7.
press <Enter>.
Do you wish to load any more
driver disks?
8.
Follow the onscreen instructions to finish the OS installation.
6-12
Enterprise RAID driver disk to the USB floppy disk drive,
®
Insert Driver Disk
OK
More Driver Disks?
Yes
No
Back
Chapter 6: Driver installation