Panasonic WV-CP504 Installation Manual page 15

x
Connect the lens cable to the ALC lens connector of the camera.
ALC lens connector
c
Secure the camera mount bracket
(option) to an installation position, and
mount the camera on the camera mount
bracket.
Important:
• If the total weight of the camera and lens
exceeds 1 kg {2.2 lbs.}, use a housing to take
measures against camera drop.
• Prepare mounting screws according to the
material of the area where the camera mount
bracket (option) is to be installed. The instal-
lation method may be different depending on
the material of the area where the bracket is
to be installed.
• When installing on steel:
Fix with bolts and nuts (M6 or M8).
• When installing on concrete:
Fix with anchor bolts or AY plug bolts (M6
or M8).
Recommended tightening torque (M6):
5.0 N·m {3.69 lbf·ft}
Recommended tightening torque (M8):
6.2 N·m {4.57 lbf·ft}
1 3
2 4
Pin No.
1
2
3
4
<Installation sample on a ceiling>
Screws (locally Screws (locally
procured) procured)
Brake @
Brake !
Drive !
Drive @
Camera mount
bracket (option)
15