Lubricating Bar-Ends - Bontrager RACE X LITE BAR-ENDS Manual

To adjust the angle of the bar-ends
1. Loosen the handlebar clamp bolt(s) just enough that
the bar-ends can be rotated on the handlebar.
2. Position the bar-ends to the desired angle.
3. Tighten as shown in Inspecting bar-ends.
If the bar-ends slip on the bar, remove the bar-ends,
clean the handlebar and bar-ends with rubbing alcohol,
and follow the inspection and adjustment procedures to
re-position the bar-ends.

Lubricating bar-ends

Once a year, lubricate the bar-end clamp bolts.
7