DirecTV H10 User Manual page 39

The DIRECTV ® HD Receiver provides several display formats as shown in the following
table. It also shows the formats available at each output terminal.
SETTINGS Front Panel
Resolution Native Resolution Indicators
480i/p
All Off ON
Auto (IRD determines
On
the resolution LED)
480i/p ON
720p OFF
1080i OFF
N/A
480i/720p ON
480ip/1080i ON
720p/1080i OFF
Default Value is 480ip and 4:3/Letterbox
Front Panel LED can change when cycling using FORMAT key on the remote.
LED can change in response to a change in the Resolution setting in System Setup.
Output Connection
YPbPr
HDMI
S-Video
Video (RCA Type/Yellow)
Remote Control Unit
FORMAT Key Cycle
720p 1080i
ON ON 480i/p/Letter, 480ip/Full, 480ip/Zoom,
720p/Letter, 720p/Full, 720p/Zoom,
1080i/Letter, 1080i/Full, 1080i/Zoom
Native/Letter, Native/Full, Native/Zoom
OFF OFF 480ip/Letter, 480ip/Full, 480ip/Zoom
ON OFF 720p/Letter, 720p/Full, 720p/Zoom
OFF ON 1080i/Letter, 1080i/Full, 1080i/Zoom
480ip/Letter, 480ip/Full, 480ip/Zoom,
ON OFF
720p/Letter, 720p/Full, 720p/Zoom
480ip/Letter, 480ip/Full, 480ip/Zoom,
OFF ON
1080i/Letter, 1080i/Full, 1080i/Zoom
720p/Letter, 720p/Full, 720p/Zoom
ON ON
1080i/Letter, 1080i/Full, 1080i/Zoom
In case of TV ratio 16:9, "Pillar" box will be displayed
instead of "Letter".
Available Formats
1080i/720p/480p/i/Native
1080i/720p/480p/i/Native
480i
480i
4:3
Guided Setup and Activation
35
Chapter 2