Using The Charger For The First Time; Charge Mode - GRAUPNER LIPO-CHARGER 2 Operating Manual

Using the charger for the first time

Input 100~240V AC
Output 2 Cells
(LiPo-charger 2)
.

Charge mode:

Connect the red BEC plug of your LiPo Balancer
Plus #3064 to the output lead of the LiPo char-
ger 2/3.
Then you should connect the white Graupner
Balancer plug of the battery to the OUTPUT of
the LiPo Balancer Plus, and then the red battery
connector to the BATTERY input of the LiPo Ba-
lancer Plus, left-aligned.
Now you're ready to connect the LiPo Balancer
Plus by pressing the MODE/RESET key until the
status LED begins to flash.
This charging procedure obtains that the battery
will be fully (100%) and carefully charged
During the charging process the red LED of the
LiPo charger 2/3 will be lit.
Battery charged:
As soon as the battery has reached its full
(100%) capacity the device will be automatically
switched off. This will be signalled by the fading
off of the red LED. The green LED will be lit.
It is completely normal that the battery pack
doesn't warm up, or at least only marginally, sin-
ce the LiPo charger 2/3 automatically reduces
the charge current by the end of the charging
process.
8 Using the charger for the first time
LED red/green
Output 3 Cells
(LiPo-charger 3)
Connection
example:
Specifications:
Input voltage:
Type of battery:
Number of cells:
Charge current:
Optical indicators:
Output interface:
Dimensions (L/B/H):
Weight:
EC Conformity Information:
We hereby certify that the product designated in the
following:
Li-Po Charger 2 Order-Nr. 6452
Li-Po Charger 3 Order-Nr. 6453
complies with the essential safety requirements as laid
down in the Outlines of the Council for the Adaptation
of Legal Regulations for Electro-Magnetic Compatibility
(89/336/EWG) in its member states.
In assessing the electro-magnetic compatibility of this
product the following norms have been applied:
EN 55022
EN 61000-3-2/EN 61000-3-3
EN 55024
EN 60950-1
This declaration of responsibility has been issued in
accordance with the producer/importer:
Graupner GmbH & Co. KG
Henriettenstrasse 94-96
D-73230 Kirchheim/Teck by
73230 Kirchheim/Teck, signed on 16.01.07
100 - 240V AC
LiPo; LiIo
(only 3.7V types)
2
(LiPo charger 2)
3
(LiPo charger 3)
max. 0.9A auto
LEDs red and green
Graupner BEC plug
approx. 85x53x34mm
approx. 136 g.
Hans Graupner
Managing Director