DirecTV HD DVR PRO Manual page 17

Connect video,
audio, your
satellite dish, a
phone line, power,
and you're done!
6) COMPONENT OUT/ YPbPr (G, R, B) – Provides good HD picture quality, but not as good as
HDMI. YPbPr carries only picture information, not sound; use it along with a digital audio connection
or AUDIO (L/R red/white) jacks.
7) AUDIO (R-Red and L-White) – Audio cables off er good, non-digital sound quality. You can connect a
second set of audio cables to another component, such as a VCR or stereo.
8) RS232C – Receives data from external devices. (Future use.)
9) DIGITAL AUDIO OUT (OPTICAL) – Provides digital-quality audio signal. (Cable sold separately.)
10) DIGITAL AUDIO OUT (COAX) – Provides digital-quality audio signal. (Cable sold separately.)
11) IR INPUT –Use with an external IR Repeater/Emitter when your receiver is enclosed and can't "see"
the remote.
12) HDMI OPTICAL – Provides the best quality HD picture (better than YPbPr/component video).
HDMI also provides audio, for a high-quality, "one-cable" solution. With optional converter and fi ber
optic cable, you may place your TV up to 300 feet from your DIRECTV HD DVR PRO Receiver.
13) S-ATA PORT – For future use.
14) HDMI SWITCH – Move this switch to select the type of HDMI cable you are using.
15) ETHERNET 1 & 2 (RJ45) – Provides connectivity to your home network, and to the Internet, so you
can access your Music & Photos from your DIRECTV Receiver and access DIRECTV On Demand
broadband programming. (Note: Th is socket provides 5 Volts DC Power. Please ensure your equipment is
compatible prior to connection.)
16) HDMI – Th e same quality as HDMI Optical, using a traditional copper cable.
17) PHONE – Connects the DIRECTV HD DVR PRO to a telephone wall jack. We require a land-based
telephone connection to communicate periodically with your DIRECTV HD DVR PRO.
18) AC POWER – Connects the DIRECTV HD DVR PRO to an electrical outlet. We recommend you use
a surge protector to safeguard your DIRECTV HD DVR PRO from power spikes.
7