Auto Configure Function; Rgb Config. Function; Using The Still Function - LG HX300G Owner's Manual

Auto Configure Function

* This function assures you of getting the best video quality by automatically adjusting the horizontal size and
synchronization of the image.
* Auto Tracking function works in RGB PC input only.
Press the AUTO button of the remote control.
• If you execute screen adjustment for a video from PC graphic signal, optimal
state may not be found. Execute the Auto Config. function for a still image.
• You can use this function through the MENU button.

RGB Config. Function

1. Press the MENU button. Then, move to SCREEN with the
∧, ∨, ＜, ＞ buttons and press the ◉OK button.
2. Press the ∧, ∨ buttons to move to RGB Config. and press
the ◉OK button.
3. Move to a desired item with the ∧, ∨ buttons and then
press the ＞ button.
4. Press the ∧, ∨, ＜, ＞ button to adjust the screen condi-
tion as you want and then press the ◉OK button.
• Resolution can be chosen between 768 resolution (1024x768/1280x768/1360x768, 60Hz).
• Press the BACK button to exit the menu screen.

Using the Still Function

1. Press the STILL button on the remote control.
* You can freeze the moving image.
< Moving Image >
2. To exit STILL, press any button.
* The STILL function will release automatically after approximately 10 minutes.
< Still Image >
Auto config.
RGB Config.
ꔂMove ꕉPrev.
ꔐ
ꔃ 1024 x 768
Resolution
1280 x 768
Auto Config.
1360 x 768
Position
Size
Phase
Reset
Function
21