Screen Menu Options; To Change Pjt Mode; Using Aspect Ratio Function; Using Keystone Function - LG HX300G Owner's Manual

Function

SCREEN Menu Options

To Change PJT Mode

* This function turns the projected image upside down or flips horizontal.
1. Press the Q.MENU button on the remote control.
2. Press the ＜, ＞ buttons to move to PJT Mode.
3. Press the ∧, ∨ button to select a desired item.
• Select Rear when projecting from the back of the transparent screen purchased
separately.
• Select Ceiling when installing the product on the ceiling.
• When PJT Mode is Rear/Ceiling, the left/right of the speaker changes automatically.
• You can use this function through the MENU button.
• Press the BACK button to exit the menu screen.

Using Aspect Ratio Function

Press the RATIO button to select a desired screen size.
ꔗ
4:3
ꔗ
Cinema Zoom1
• Some options may not be available depending on input signals.
• You can use this function through the MENU button.
• Press the BACK button to exit the menu screen.

Using Keystone Function

* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystone function when you can't get the best angle of projection.
1. Press the KEY.Sꔌ, KEY.Sꔍ button of remote control.
2. Press the KEY.Sꔌ, KEY.Sꔍ button to adjust the screen condition as
you want.
• Keystone can be adjusted from -40 to 40.
• You can use this function through the MENU button.
• Press the BACK button to exit the menu screen.
20
ꔃ ꔗ
Just Scan
ꔃ ꔗ
Zoom
ꔃ ꔗ
Set By Program
ꔃ ꔗ
16:9
•Keystone
PJT Mode
Front
Aspect Ratio
ꔃ
16:9
ꔃ
0 ꔗ
-
ꔃ
+
ꔉOK