Adding Intel Raid Controller Srcmr Controller(S), Drivers, And/Or Storage Console To An Existing Netware Installation; Installing The Intel Raid Controller Srcmr Driver Package - Intel SRCMR - RAID Controller User Manual

Adding Intel RAID Controller SRCMR Controller(s),
Drivers, and/or Storage Console to an Existing NetWare
Installation
Install all Novell patches and updates prior to installing the Intel RAID Controller SRCMR driver
and Storage Console. These updates can be found at:
http://www.novell.com
1. Create a driver diskette from the RAID Software Suite CD-ROM. See Chapter 2 for details to
create this disk.
2. Power off the system and add the Intel RAID Controller SRCMR card(s).
3. Power on the system and boot to the OS.
4. Load NWCONFIG.NLM (For 5.x and above).
5. Insert the driver diskette into drive A.
6. Do one or both of the following to install your desired packages (you do not need to reinstall
the driver package if you initially installed the driver using one of the steps under New
Installation of NetWare 5.1).

Installing the Intel RAID Controller SRCMR Driver Package

1. Select Product options, then Install a product not listed.
2. Change the path to A:\INSTALL and press <Enter> to continue.
3. Select Storage RAID Controller Driver (SRCRX.HAM) by setting the cursor on its menu item
and pressing the space bar (an X will appear in the item's checkbox).
4. Press <F10> to accept the selected item.
5. After the file copy is complete, select Return to previous menu to get back to the
INSTALL/NWCONFIG main options.
6. Select Driver Options.
7. Select Configure disk and storage device drivers.
8. Select Discover and load additional drivers.
9. Press <Enter> to continue past any module load errors not related to the Intel RAID Controller
SRCMR.
10. Press <F3> to continue past any non Intel RAID Controller SRCMR related hardware found by
NetWare for which a matching driver was not found.
11. NetWare will now load the SRCRX.HAM driver for each hardware instance you added in the
system and update the STARTUP.NCF file so the driver will load for each subsequent restart of
the server.
12. Select Return to previous menu twice to get back to the INSTALL/NWCONFIG main options.
Installing Novell Netware 63