Chapter 2, Intel Raid Controller Rs2Wc080 Hardware Installation; Requirements; Installing The Raid Controller - Intel RS2WC080 Hardware User's Manual

2
Intel
Hardware Installation

Requirements

•
An Intel
•
A host system with an available x8 or x16 PCI-Express* slot
•
The Resource CD, which contains drivers and documentation
•
SAS or SATA 3.0 hard drives
Note: SATA II is the only type of SATA supported by this RAID Controller.
In addition, Intel Corporation strongly recommends using an uninterruptible power supply
(UPS).

Installing the RAID Controller

To install the RAID Controller, follow these steps:
1. Turn off the power to the system, all drives, enclosures, and system components.
Remove the power cord(s).
2. Remove the server system cover. For instructions, see the server system
documentation.
3. If necessary, change the bracket on the RAID controller to fit the height of the
server system (see
Intel® RAID Controller RS2WC080 Hardware User's Guide
®
RAID Controller RS2WC080
®
RAID Controller RS2WC080 with the provided cables
Figure 1).
7