Table of Contents
Advertisement
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut down
the engine if the system receives any of the following shut-down
inputs:
s
The brake pedal is pressed.
s
The hood is opened.
s
The shutdown toggle switch is put into the ON position.
s
The pre-programmed run time has elapsed.
s
Buttons
and
To shut down the remote start and turn off the engine:
s
Step on the brake pedal, or
s
Press
and
Timer Mode
Timer Mode automatically starts the engine and runs it for a pre-
programmed time period, every three hours for a total of six
operation cycles. This feature helps to ensure that your engine will
start in the morning after a night of extremely cold temperatures.
IMPORTANT! This feature must only be used in open areas, never in an
enclosed area such as a garage.
To enter Timer Mode:
1.
Start the vehicle by pressing and releasing
2.
Press and release
3.
Within two seconds press and release
10
are pressed again.
for one second.
.
2001 Directed Electronics, Inc.
©
and
.
and
again.
Advertisement
Table of Contents
