Remote Start - Directed Electronics Cyber 130XV User Manual

The remote will respond with 3 Orange LED flashes on entering
and 2 beeps and 3 Orange LED flashes on exiting Valet
To enter or exit Valet
1. Open any vehicle door.
2. Press
3. Press
4. Press
The in-vehicle status LED will light solidly if you are entering
Valet Mode, and it will go out if you are exiting Valet
®
The remote responds with the normal arm/disarm notifications
with each remote button press.
➜

remote start

This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm
up the engine, as well as adjust the interior temperature of the ve-
hicle with the climate control system. If interior heating or
cooling is desired, the climate controls must be preset, and the
fan blower must be set to the desired level prior to remote starting
the vehicle.
i i m m p p o o r r t t a a n n t t ! ! (1) Never remote start your vehicle when the
keys are in the ignition, except when performing Valet
Take-Over, and (2) Never start the vehicle if it is not in
either PARK or NEUTRAL.
© 2004 directed electronics, inc.
® Mode using the 2-way remote:
.
.
again.
Mode.
®
Mode.
®
®
23