Panic Mode; Valet ® Mode - Directed Electronics Cyber 130XV User Manual

➜

panic mode

If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your 2-way remote. Just
press for 3-seconds, and you will enter Panic Mode. The
siren will sound and the parking lights will flash for the
programmed siren duration. To stop Panic Mode at any time,
press or
The remote responds with one flash of the Red LED upon
entering Panic Mode and two flashes of the Red LED upon
exiting Panic Mode.
➜
valet ® mode
You can prevent your security system from automatically arming
and triggering by using Valet
washing the vehicle or having it serviced. In Valet
security system will not arm, even with the 2-way remote, but all
convenience functions (door locks, trunk release, etc.) will
continue to work normally.
To enter or exit Valet
The in-vehicle status LED will light solidly if you are entering
Valet Mode, and it will go out if you are exiting Valet
®
22
on the 2-way remote.
®
® Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
button once within 10 seconds.
Mode. This is very useful when
© 2004 directed electronics, inc.
Mode, the
®
®
DRW-35
Mode.
®