Learning About The Gallery Toolbar - Visioneer PROOCR100 User Manual

Learning Pro OCR Basics

Learning About the Gallery Toolbar

file:///C|/VisioneerDoc/html/02learn.htm (5 of 33) [1/20/2003 4:21:15 PM]
Figure 2-1: Select Source Dialog Box
NOTE: If the scanner driver you want is not shown, make sure that the
scanner is properly connected to the computer and that both the scanner and
the computer are plugged in, turned on, and operating correctly.
2. In the Select Source dialog box, select the TWAIN scanner driver you want to
use with Pro OCR.
3. Click Select.
The scanner you selected is available until you select a different one. You
don't have to repeat this procedure unless you want to select a different
scanner.
The Gallery toolbar contains buttons for starting the various steps of the Pro OCR
process, including the Auto OCR button. The buttons numbered one through four are
also important because you can select different options from drop-down lists before
processing a document. For example, you can tell Pro OCR whether the document is
one column or multiple columns. The options you select from these buttons affect the
way that Auto OCR processes a document.