Using Get Page Again; Using Locate Again - Visioneer PROOCR100 User Manual

Tips for Getting the Best Results

Using Get Page Again

Using Locate Again

file:///C|/VisioneerDoc/html/08tips.htm (9 of 13) [1/20/2003 4:21:24 PM]
Recognize over again.
You may want to use Get Page again if you scan pages in with an incorrect Page
Size or Orientation setting, or if you didn't use an appropriate brightness or
scanning resolution setting. You can use Get Page again at any step in the Pro OCR
process.
If you get a page, the page is added after the current page. If the page's quality is
not good, you can delete it and redo the steps.
NOTE: When you use Get Page after deleting a page, the new page is inserted after
the current page. If the page you deleted was not the last page of the document,
make sure you move back to the page preceding the deleted page each time you
repeat this step.
This may be necessary if you decide that a located page has incorrect locate regions
on it, or if you change your mind about whether or not to locate picture regions.
You can use Locate again at any step in the Pro OCR process.
To locate the current page again:
1. Select the appropriate Locate options from the Locate drop-down list.
2. Click the Locate button, or choose Locate from the Process menu.
OR
1. Delete some or all locate regions, if necessary.
2. Manually locate new locate regions, or resize existing locate regions, or
redefine existing locate regions, if necessary.
You may use Locate again for individual pages in the current document.
NOTE: After you locate a page again, you must use Recognize on a page again
before any changes to the locate regions show up in the recognized text.