Creating A New Advanced Interface Profile - Visioneer PATRIOT 680 SCANNER User Manual

78 V P
ISIONEER ATRIOT
680 S U ' G
CANNER SER S UIDE
T S I B
HE CAN NFO OX
The following figure shows the information on the Scan Info box.
Location of the top
left corner of the
image in the
Preview window.
Current location of
the pointer as you
drag it on the
Preview window.
C N A
REATING A EW DVANCED
You cannot change the settings of the preset profiles in the Advanced Interface.
However you can create new profiles and save them for future use.
To create a new profile:
1. On the Advanced Interface, select one of the preset profiles, for example,
Black&White Configurations/Custom.
2. Adjust the settings as required and then click the Save As button.
3. Type a name for the new profile and click OK. The name must be at least
two characters long.
Your new profile is added to the configuration list.
To change or delete a profile you created:
1. Select your profile from the configuration list.
2. Make changes to the profile as needed, and then click Save.
3. If you want to delete the selected profile, click Delete.
Physical size of the
image to scan.
The space on your
computer's hard drive.
I P
NTERFACE ROFILE
Size of the file of the
scanned image.