Accessing The Twain Interface - Visioneer PATRIOT 680 SCANNER User Manual

A TWAIN I
CCESSING THE
Open the TWAIN interface from OneTouch
1. Open the OneTouch properties and select a button to set for Configure
Before Scan.
2. Select a Destination Application and File Format.
3. Select Configure Before Scan then right-click on it and select TWAIN
from the menu.
4. Click on OK to close the OneTouch Properties window.
5. Load documents in the scanner then press the OneTouch button you set
to use as Configure Before Scan.
Open the TWAIN interface from an application
1. Open a TWAIN-compliant scanning application.
2. Use that applications command to open the TWAIN scanning interface.
Many Microsoft Office applications can access the TWAIN interface from
the Insert menu, by choosing Picture then From Scanner or Camera.
3. The TWAIN Interface will open and you are ready to start scanning.
Please refer to an application's user guide for the appropriate steps to open the
TWAIN Interface for your scanner.
A TWAIN I
CCESSING THE
NTERFACE
In this example, button
9 is being set to use
Configure Before Scan.
67
NTERFACE