Snmpv2 Trap Host Configuration; Snmpv3 Trap Host Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Application Manual

SNMPv2 trap host configuration

The SNMPv2 trap host configuration is similar to the SNMPv1 trap host configuration.
Wherever you specify the model, specify snmpv2 instead of snmpv1.
c/sys/ssnmp/snmpv3/usm 10
name "v2trap"
/c/sys/ssnmp/snmpv3/access 10
/c/sys/ssnmp/snmpv3/group 10
/c/sys/ssnmp/snmpv3/notify 10
/c/sys/ssnmp/snmpv3/taddr 10
/c/sys/ssnmp/snmpv3/tparam 10
/c/sys/ssnmp/snmpv3/comm 10

SNMPv3 trap host configuration

To configure a user for SNMPv3 traps, you can choose to send the traps with both privacy and authentication, with
authentication only, or without privacy or authentication. Use the following commands to configure the access table:
/c/sys/ssnmp/snmpv3/access <x>/level
/c/sys/ssnmp/snmpv3/tparam <x>
Configure the user in the user table to match the configuration of the access table.
It is not necessary to configure the community table for SNMPv3 traps because the community string is not used by
SNMPv3.
The following example shows how to configure a SNMPv3 user v3trap with authentication only:
/c/sys/ssnmp/snmpv3/usm 11
/c/sys/ssnmp/snmpv3/access 11
/c/sys/ssnmp/snmpv3/group 11
/c/sys/ssnmp/snmpv3/notify 11
/c/sys/ssnmp/snmpv3/taddr 11
/c/sys/ssnmp/snmpv3/tparam 11
For more information on using SNMP, see the HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command
Reference Guide.
name "v2trap"
model snmpv2
nview "iso"
model snmpv2
uname v2trap
gname v2trap
name v2trap
tag v2trap
name v2trap
addr 47.81.25.66
taglist v2trap
pname v2param
name v2param
mpmodel snmpv2c
uname v2trap
model snmpv2
index v2trap
name public
uname v2trap
name "v3trap"
auth md5
authpw v3trap
name "v3trap"
level authNoPriv
nview "iso"
uname v3trap
gname v3trap
name v3trap
tag v3trap
name v3trap
addr 47.81.25.66
taglist v3trap
pname v3param
name v3param
uname v3trap
level authNoPriv
(Configure user named "v2trap")
(Define access group to view SNMPv2 traps)
(Assign user to the access group)
(Assign user to the notify table)
(Define an IP address to send traps)
(Specify SNMPv2 traps to send)
(Define the community string)
(Configure user named "v3trap")
(Define access group to view SNMPv3 traps)
(Assign user to the access group)
(Assign user to the notify table)
(Define an IP address to send traps)
(Specify SNMPv3 traps to send)
(Set the authentication level)
Accessing the switch 16