Configuring Snmp Trap Hosts; Snmpv1 Trap Host - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Application Manual

Configuring SNMP trap hosts

SNMPv1 trap host

1. Configure a user with no authentication or password.
/c/sys/ssnmp/snmpv3/usm 10
name "v1trap"
2. Configure an access group and group table entries for the user. Use the following command to specify which
traps can be received by the user:
/c/sys/ssnmp/snmpv3/access <x>/nview
/c/sys/ssnmp/snmpv3/access 10
name "v1trap"
model snmpv1
nview "iso"
/c/sys/ssnmp/snmpv3/group 10
model snmpv1
uname v1trap
gname v1trap
In this example the user will receive the traps sent by the switch.
3. Configure an entry in the notify table.
/c/sys/ssnmp/snmpv3/notify 10
name v1trap
tag v1trap
4. Specify the IP address and other trap parameters in the Target Address( targetAddr) and Target Parameters
(targetParam) tables. Use the following command to specify the user name used with this targetParam table:
c/sys/ssnmp/snmpv3/tparam <x>/uname
/c/sys/ssnmp/snmpv3/taddr 10
name v1trap
addr 47.80.23.245
taglist v1trap
pname v1param
/c/sys/ssnmp/snmpv3/tparam 10
name v1param
mpmodel snmpv1
uname v1trap
model snmpv1
5. Use the community table to define the community string used in the traps.
/c/sys/ssnmp/snmpv3/comm 10
index v1trap
name public
uname v1trap
(Configure user named "v1trap")
(Define access group to view SNMPv1 traps)
(Assign user to the access group)
(Assign user to the notify table)
(Define an IP address to send traps)
(Specify SNMPv1 traps to send)
(Define the community string)
Accessing the switch 15