Disabling And Re-Enabling The Back-Up Battery Siren - Directed Electronics 200 Owner's Manual

To disarm the security system,
turn the ignition to the "on"
position. Press the Valet switch
the selected number of times (1-5
presses) within 15 seconds. The system should now disarm. If it
does not, you may have waited too long to press the Valet switch;
turn the ignition off and on and try again.
LOCATION OF VALET SWITCH______________________________
IMPORTANT! The unit can be programmed to respond to 1-5 pulses of
the Valet ® switch for the disarm function. Be sure to check with the
installer for the desired programming.

Disabling and Re-Enabling the Back-Up Battery Siren

If the vehicle battery has been disconnected or is low on power,
the back-up battery siren will sound.
2001 Directed Electronics, Inc.
©
DRW-35
9