Disabling The Remote Start System - Directed Electronics Avital 3300 Owner's Manual

To exit Timer Mode:
Timer Mode can be exited by turning the ignition on with the key
any time that the vehicle engine is not running. You can also exit
Timer Mode using the transmitter by following these steps:
1. Start the engine by pressing
simultaneously.
2. Press and release
3. Within two seconds, press and release
transmitter again.
4. The vehicle engine will shut down and the parking lights will
flash four times to confirm that Timer Mode has been exited.
If the vehicle has already been remote started, you may skip
Step One.

Disabling the Remote Start System

This feature allows your system's remote start unit to be tem-
porarily disabled to prevent the vehicle from being remote started
accidentally. This feature is useful if the vehicle is being serviced
or stored in an enclosed area. To disable the remote start, move
the supplied shutdown toggle switch to the OFF position. The
switch can be installed in a location of your choice. Check with
your installer for recommended locations.
LOCATION OF SHUTDOWN SWITCH_________________________
2000 Directed Electronics, Inc.
©
and on the transmitter
on the transmitter.
and on the
19