Appletalk Protocol Information - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Table 8-10 Novell/NetWare
Message
STATUS
NODE NAME
NDS TREE NAME
NDS CONTEXT
ATTACHED SERVER
QUEUE POLL INTERVAL
SAP INTERVAL
ATTACHED SERVER

AppleTalk Protocol Information

Information in this section of the Jetdirect configuration page (Ethernet Only) is described in
8-11 AppleTalk Configuration Information on page
Messages on page
138 Chapter 8 HP Jetdirect Configuration Pages
Configuration Information
Description
Indicates the current Novell NetWare configuration status.
READY: Indicates the HP Jetdirect print server is awaiting data.
DISABLED: Indicates that IPX/SPX was manually disabled.
INITIALIZING: Indicates that the print server is registering the node address or name.
An additional status message may also be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
Queue Server
on the appropriate NetWare file server. The default name is NPIXXXXXX, where
XXXXXX is the last six digits of the LAN hardware (MAC) address.
Remote Printer
network printer. The default name is NPIXXXXXX.
The mode used by the HP Jetdirect print server.
QUEUE SERVER: Indicates that the print server receives data directly from the queue.
REMOTE PRINTER
emulates a Novell NetWare remote printer.
If the printer is not configured, this field displays
Displays the name of the Novell Directory Services (NDS) tree for this printer. NDS is
a database of objects on a NetWare network organized in a hierarchical tree structure.
Not Specified
Displays the fully qualified NDS name where the HP Jetdirect print server object resides
in the NDS tree. For example:
CN=lj_pserver.OU=support.OU=mycity.OU=mycompany
Not Specified or blank: NDS is disabled.
The Attached Server field identifies the Jetdirect discovery method [NSQ] (Nearest
Service Query) or [GSQ] (General Service Query) and the name of the proxy file server
used to locate the configured bindery servers.
Not Specified
(Job Poll Interval) Specifies the time interval (seconds) that the HP Jetdirect print server
waits to check for print jobs in a print queue. The default is 2 seconds.
Specifies the time interval (seconds) that the HP Jetdirect print server waits between
Service Advertising Protocol (SAP) broadcasts on the network. The default is 60
seconds.
Identifies a NetWare file server to which the HP Jetdirect print server is attached.
140.
Table 8-13 Error Messages on page
Mode: The print server name. This name must match a valid print server
Mode: The name you gave the network printer when you configured the
(followed by the printer number): Indicates that the print server
or blank: NDS is disabled.
or blank: A NetWare server has not been configured.
139. For error messages, see
140.
QUEUE SERVER.
Table
Table 8-13 Error
ENWW