Juniper MX240 - UPGRADING Manual page 21

Copyright © 2010, Juniper Networks, Inc.
Observe the status LEDs on the power supply faceplate. If the power supply is correctly
installed and functioning normally, the
green steadily.
NOTE: If more than one power supply is being installed, turn on all power
supplies at the same time.
NOTE: An SCB must be present for the
Figure 16: Installing a DC Power Supply in the Router
Installing the MX240 and MX480 DC High-Capacity Power Supplies
,
PWR OK BRKR ON
PWR OK
, and LEDs light
INPUT OK
LED to go on.
21