Maintaining M10I Router Hardware Components; Routine Maintenance Procedures For The M10I Router; Maintaining The M10I Cfeb And Cfeb-E; Appendix G Contacting Customer Support And Returning M10I Hardware - Juniper M10I Hardware Manual

CHAPTER 13
Maintaining M10i Router Hardware
Components

Routine Maintenance Procedures for the M10i Router

Purpose
Action
Related
Documentation

Maintaining the M10i CFEB and CFEB-E

Purpose
Copyright © 2010, Juniper Networks, Inc.
This chapter describes how to maintain hardware components installed in the router.
For information about returning a part to Juniper Networks for repair or replacement, see
"Contacting Customer Support and Returning M10i Hardware" on page 207.
Routine Maintenance Procedures for the M10i Router on page 79
Maintaining the M10i CFEB and CFEB-E on page 79
Maintaining the M10i Cooling System on page 80
Maintaining the M10i PICs and PIC Cables on page 81
Maintaining the M10i Power Supplies on page 82
Maintaining the M10i Routing Engine on page 83
For optimum router performance, perform preventive maintenance procedures.
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Verify that airflow is unobstructed around the router and into the air intake vents.
Check the LEDs on the HCM and on hardware components. See "M10i High-Availability
Chassis Manager (HCM) Description" on page 21.
M10i Router Environmental Specifications on page 185
M10i Router Physical Specifications on page 183
Packing the M10i Router for Shipment on page 214
M10i Chassis Description on page 5
For optimum cooling, verify the condition of the CFEB.
79