Lifescan BASIC - 11-96 Owner's Booklet page 53

MESSAGE
insert
insert
insert
(example)
memory
retest
PROBLEM
When any message flashes
continually, it means the
battery is getting low.
Your last test result was not
stored in the Meter's memory
for one of the following reasons:
1) A not enough blood
retest message was dis-
played during your last
blood or Control Solution
test due to a too small or
smeared sample.
WHAT TO DO
Test results will still be
accurate, but replace
the battery as soon as
possible.
Repeat the test with a
new Test Strip and a
larger drop of blood.
48