Coding The Meter - Lifescan BASIC - 11-96 Owner's Booklet

Coding the Meter

IMPORTANT: Every time you
test, the code number on the
Meter display must match
the code number on the
ONE TOUCH
package you're using. If these
two code numbers do not match,
you will get inaccurate results.
Set the code:
Before using the Meter for the
first time.
Every time you open a new
package of Test Strips or change
to a different package of Test
Strips.
Test Strip
®
If the Meter is displaying reset
code.
Step 1: Turn on the Meter
Press the On/Off Button to turn the
Meter on. The result from your last
blood glucose or Control Solution
test will appear for 3 seconds.
memory
106
(example)
(Your ONE TOUCH
matically recalls and displays your last
result—either from a blood glucose or
Control Solution test—whenever the Meter
is turned on. When using the meter for the
first time, memory/no data appears to
indicate that there is no test result in the
memory. See Displaying Last Test Result,
page 38.)
8
memory
or
c98
(example)
BASIC Meter auto-
® ™