Ericsson DIALOG 4223 PROFESSIONAL - MANUAL 2 User Manual page 96

Settings
Ô
Ô Õ
96
Program or change a function
Press the key to program or change.
Notes:
If the key is already programmed, the number or function
will be displayed. If you do not want to change the
programmed function, press
without saving the changes.
To erase a programmed function, press the Clear key, and
z
press
Enter phone number or a function code according to the list
in section "Functions and required data".
Notes:
If a wrong number is entered, press the Clear key to erase
it, and then enter the number again.
You can continue programming another function key
(repeat from "Press the key to program or change").
Press the function key again.
Exit
Press to finish programming (see display).
Remove the transparent cover and write the function name or
phone number beside the key.
Note: Use the DCM (Designation Card Manager) to make
and print your own designation cards. DCM is included on
the Telephone Toolbox CD for MD110 Communication
System or it can be downloaded from:
http://www.ericsson.com/enterprise/library/manuals.shtml
For more information, please contact your Ericsson
Enterprise certified sales partner.
Exit
to leave the menu.
Dialog 4223 Professional/Dialog 4225 Vision
Exit
to leave the menu