Ericsson DIALOG 4223 PROFESSIONAL - MANUAL 3 User Manual page 87

í
Ô Ö
Ô Õ
Line
Program
Ô
Line
Dialog 4223 Professional
To delete the current melody:
Press and hold until no notes are displayed.
Press the flashing Line key (Line 1 or Line 2 or Inquiry).
Press.
Activate or deactivate a stored melody
A stored melody has to be activated in melody mode to be heard
when you get an incoming call.
To activate (in melody mode):
Press the key for the requested type of call (Line 1 or Line 2
or Inquiry).
The corresponding key lamp is switched on:
Line 1 key = Internal calls
Line 2 key = External calls
Inquiry key = Callback calls
Note: If you want to return to an ordinary ring signal but
keep the melody stored, just press the key for the requested
type of call again. When the key lamp is off the stored
#
melody is deactivated.
Press to exit melody mode.
Settings
87