Table of Contents
Advertisement
The Locks Menu contains the following choices
for enabling protection services in the phone to
limit its use. You can select the lock options
most useful for your desired level of phone
security. You must enter your security code
before you can open the Locks menu.
Auto Lock
When selected, the phone is automatically
locked from making calls each time you turn the
phone on. To unlock the phone, enter the
security code.
Dialing
You can use this option to restrict outgoing
calls. Selections for this function include:
Allow all
No outgoing call restrictions.
Restrict all
Allows dialing of emergency numbers only.
Local + 800 # only
Only numbers with up to 7 digits and 10-11
digit 800 (or 888) numbers. No operator
access.
Memory only
Allows calls only to numbers stored in
memory. Numbers cannot be stored in
memory while this restriction is enabled.
Locks Menu
Local + 800 # + mem only
Only the combination of the two preceding
options can be dialed.
Restrict Internat.
Only 11 digits or fewer can be dialed,
and operator access is restricted.
Restrict 900 #
No calls allowed with the area codes 900. No
operator access.
Restrict Operator
Allows all calls except for operator access
(dialing 0).
Call Cards
You can Allow or Restrict the use of calls using
a calling card or calling card features. See page
28 for information on programming calling card
numbers.
Receiving
You can allow or restrict incoming phone calls.
If selected, the phone does not ring incoming
calls.
Sec. Code
You can change your four-digit security code.
The factory-set code is 0000. You are prompted
to repeat the code for verification.
Menu Descriptions
27
Advertisement
Table of Contents
