Download Print this page

Roland R-44 - ANNEXE 485 Brochure page 3

4-channel portable recorder

Advertisement

■ Built-in mics
Stereo microphones. Input sensitivity knob and high
response meter enable precise level adjustment.
■ Phantom Power Switches
On/Off switch to control the phantom power supply to
XLR input jacks. Independent control of each input.
■ Hold Switch
Prevents unintentional operations by locking the top and
front panel buttons.
■ Exit Button
Returns to previous screen or cancels current operation.
■ Effects Button
Calls up on-board studio class effects. Assign to inputs
and outputs as well as individual channels.
■ Marker/Cursor Buttons
Pressing the MARK button adds markers to the project
enabling quick access to points of playback. The 4
buttons also work as cursor control while a menu is
selected.
■ A-B Repeat Button
Set A-B points in a project to repeat playback between
loop points.
■ Display
Organic LED provides high contrast and quick response
with benefits of wide angle visibility.
■ Input Sensitivity & Level Knobs
Dual type knobs adjusts both input sensitivities and levels
for Ch 1-4 independently.
■ Memory Card Slot
For SD and large capacity SDHC cards.
■ Control Sync
Link two R-44 units together for
8-channel recording.
■ Digital Output
Digital coaxial type connector for
output to external digital devices
such as speakers/mixers.
■ Digital Input
Digital coaxial type connector for
inputting digital signals.
from microphones to musical instruments. High quality
analog circuitry in the preamp ensures superior
recording results.
High-contrast Organic LED display
and operation-oriented user interface.
The high contrast, high
response organic LED
screen, viewable from wide
angles ensures fluid
operation in field recording
▲Mixer Display
situations. The high
response of level meters
makes precise level
adjustments possible. All
the necessary switches and
▲6-Band Graphic EQ Display
knobs are located on the
top and front panels. Self-lit
buttons on all the key
controls enable clear-cut
recording operations.
▲Recording Setup Display
■ USB Port
Mini B type port for computer connection.
Enables copying files to or from computers.
■ Line Output Terminals
Four RCA jacks for independent monitoring of all
channels.
Capture eight channels by linking
two units.
The Control Sync terminal enables synchronized
operation of 2 units. Control the second unit from the
master by simply connecting two with a stereo mini
cable. The master unit can remotely control REC
standby, REC start and REC stop of the slave unit.
This function
enables
8-channel
recording in a
compact space
and at an
affordable price.
Link to computer via
high speed USB.
The R-44 can be mounted on computers with a
simple USB 2.0 connection. It is seen as an USB
■ Built-in speakers
Speakers for stand-alone monitoring.
■ Limiter Switch
Suppresses sudden audio peaks and compresses signal
to a threshold level. Independent On/Off or stereo link of
channels 1-2 and 3-4 is possible.
■ Low-Cut Switch
Rolls off low frequencies within input signals to prevent
noise such as mic handling, breath pops or wind noise.
■ Scrub Dial
Enables speedy selection of parameters or changing
values within menus. Moves current position forward or
backward during playback or pause.
■ Menu Button
Calls up menu screen for REC/PLAY setup or other
system preferences.
■ ENTER/FINDER Button
Use to set a value or parameter selection. This also calls
up the Finder function allowing file management
functions such as Delete, Copy, Move, etc.
■ PREV/NEXT/PLAY Buttons
PREV and NEXT buttons allow selection of the previous
or next file. Hold down these buttons for rewind or fast-
forward. PLAY button lights in blue during playback.
■ Display Button
Switches current contents to be shown on display.
■ STOP/PAUSE/REC Buttons
REC button lights in red during recording and blinks in
standby mode. The slanted panel provides smooth and
easy access.
■ Phone Jack & Level knob
1/4 inch stereo phone jack for headphone connection and
level adjustment knob.
■ Combo Type Input Terminals
Support both balanced (XLR/TRS type) and unbalanced (standard type)
inputs. Phantom power can be supplied to each XLR jack.
Windows Vista
®
* SD Memory Card and Batteries are not included.
storage device on a
computer. You can copy
data back and forth
with a simple drag &
drop operation.
Four hours of recording with four
AA batteries.
The R-44 can be operated
with 3 types of power supply,
AC adaptor, external battery
and AA batteries.
Four hours* of operation is
possible with NiMH or
alkaline batteries.
* at 16-bit/44.1kHz stereo. No phantom
power and pre-record disabled.
/Windows
®
XP/2000
Mac OS X

Advertisement

loading

This manual is also suitable for:

R-44