L2Tp - D-Link DIR-665 User Manual

Secton  - Configuraton
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
Address Mode: Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases,
select Dynamic.
Enable Advanced DNS
Advanced Domain Name System (DNS) services enhances
Service:
your Internet performance by getting you the information
and web pages you are looking for faster and more reliably.
In addition, it improves your overall Internet experience
by correcting many common typo mistakes automatically,
taking you where you intended to go and saving you valuable
time.
L2TP IP Address:
Enter the L2TP IP address supplied by your ISP (Static
only).
L2TP Subnet Mask:
Enter the Subnet Mask supplied by your ISP (Static only).
L2TP Gateway:
Enter the Gateway IP Address provided by your ISP.
L2TP Server IP:
Enter the Server IP provided by your ISP (optional).
Username:
Enter your L2TP username.
Password:
Enter your L2TP password and then retype the password in
the next box.
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
D-Lnk DIR-665 User Manual
Internet Setup

L2TP