D-Link DIR-665 User Manual page 26

Secton  - Configuraton
Enable Wireless:
Check the box to enable the wireless function. If you do not
want to use wireless, uncheck the box to disable all the wireless
functions.
Wireless Network Service Set Identifier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The SSID
Name:
is case-sensitive.
Enable Auto
The Auto. Channel. Scan setting can be selected to allow
Channel Scan:
the DIR-665 to choose the channel with the least amount of
interference.
802.11 Mode: Select one of the following:
802.11g. Only - Select if all of your wireless clients are
802.11g.
802.11n.Only - Select only if all of your wireless clients are
802.11n.
Mixed.802.11n.and.802.11g - Select if you are using a mix of
802.11n and 11g wireless clients.
Wireless Channel: Indicates the channel setting for the DIR-665. By default the
channel is set to 6. The Channel can be changed to fit the
channel setting for an existing wireless network or to customize
the wireless network. If you enable Auto.Channel.Scan, this option will be greyed out.
Channel Width:
Select the Channel Width:
Auto.20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
40MHz - Select if using only 802.11n wireless clients.
Visibility Status:
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-665. If Invisible is selected,
the SSID of the DIR-665 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your
DIR-665.
Protect your privacy settings by configuring the security features. You may select from three security modes: WPA-Personal.
Security Mode:
and WPA-Enterprise..
D-Lnk DIR-665 User Manual