Using Windows ® Xp - D-Link DIR-665 User Manual

Secton 5 - Connectng to a Wreless Network
Using Windows XP
®
Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for
Service Pack 2 users. If you are using another company's utility or Windows 2000, please refer to the user manual of
your wireless adapter for help with connecting to a wireless network. Most utilities will have a "site survey" option similar
to the Windows XP utility as seen below.
If you receive the Wireless.Networks.Detected bubble, click on
the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower
right corner next to the time). Select View. Available.Wireless.
Networks.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click the
Connect button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking.
Basics section in this manual for more information.
D-Lnk DIR-665 User Manual 6