D-Link DIR-645 User Manual page 63

Section 3 - Software Configuration
IPv6 Connection Type: 6to4
In this section the user can configure the IPv6 6to4 connection settings.
6to4 is an IPv6 address assignment and automatic tunneling technology
that used to provide unicast IPv6 connectivity between IPv6 sites and
hosts across the IPv4 Internet.
The following parameters will be available for configuration:
6to4 Address: Here the 6to4 configured address will be displayed.
6to4 Relay: Enter the 6to4 relay address used here.
Primary DNS Enter the primary DNS Server address used here.
Server:
Secondary DNS
Enter the secondary DNS Server address used
Server:
here.
The following parameters will be available for configuration:
LAN IPv6 Enter the LAN IPv6 address used here. This address
Address:
must be in the '/64' subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used
Local Address: here.
Enable Automatic
The user can tick this option to enable the auto-
IPv6 address
configuration feature.
Autoconfiguration
The user can select the auto-configuration type
Type:
used here.
Router
This option is only available when the auto-
Advertisement
configuration type is set to Stateless. Enter the
Lifetime:
router advertisement lifetime value used here
D-Link DIR-645 User Manual 59