D-Link DIR-645 User Manual page 51

Section 3 - Software Configuration
Obtain IPv6 Select this option to obtain the DNS Server
DNS Server addresses automatically.
automatically:
Use the
Select this option to manually enter the DNS
following IPv6
Server addresses used.
DNS Servers:
Primary DNS: Enter the primary DNS Server address used here.
Secondary DNS: Enter the secondary DNS Server address used
here.
Use the section to configure the internal network settings of your router. The LAN IPv6 Link-Local Address is the IPv6 Address that you use to access
the Web-based management interface. If you change the LAN IPv6 Address here, you may need to adjust your PC's network settings to access the
network again. DHCP-PD can be used to acquire a IPv6 prefix for the LAN interface.
Enable DHCP-
Select this option to enable DHCP PD.
PD:
LAN IPv6 Enter the LAN IPv6 address used here. This address
Address: must be in the '/64' subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used
Local Address: here.
D-Link DIR-645 User Manual 47