D-Link DIR-640L User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DIR-640L
  6. User manual

D-Link DIR-640L User Manual

Wireless n300 cloud vpn router
Hide thumbs Also See for DIR-640L:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Version 1.0 | 09/25/2012

User Manual

Wireless N300 Cloud VPN Router
DIR-640L

Advertisement

Table of Contents
loading

Related Manuals for D-Link DIR-640L

Summary of Contents for D-Link DIR-640L

  • Page 1: User Manual

    Version 1.0 | 09/25/2012 User Manual Wireless N300 Cloud VPN Router DIR-640L...

  • Page 2: Preface

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description September 25, 2012 • Initial release...

  • Page 3: Table Of Contents

    Internet Connection Setup .............17 Advanced................48 Internet Connection Wizard ..........17 Virtual Server ................48 Manual Internet Connection ..........19 Application Rules ................49 Static (assigned by ISP) ..........20 QoS Engine ...................50 Dynamic (Cable) .............21 Network Filter ................52 PPPoE (DSL) ..............22 D-Link DIR-640L User Manual...
  • Page 4 SNMP ....................69 Time ....................70 Technical.Specifications...........98 SysLog .....................71 GPL.Code.Statement............99 Email Settings ................72 System ....................73 Contacting.Technical.Support........112 Firmware ..................74 Dynamic DNS ................75 Warranty................113 System Check ................76 Registration..............118 Schedule ..................77 Status.................78 Device Info ..................78 Log ....................79 D-Link DIR-640L User Manual...

  • Page 5: Product.overview

    Optional Wall-Mount Kit If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-640L will cause damage and void the warranty for this product.

  • Page 6: System Requirements

    • Firefox 3.0 or higher • Safari 3.0 or higher • Chrome 2.0 or higher Windows . Users: Make sure you have the latest version of Java ® installed. Visit www.java.com to download the latest version. D-Link DIR-640L User Manual...

  • Page 7: Introduction

    14x faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network to share photos, files, music, video, printers, and network storage throughout your home. Connect the DIR-640L router to a cable or DSL modem and share your high-speed Internet access with everyone on the network.

  • Page 8: Features

    • Secure.Multiple/Concurrent.Sessions - The DIR-640L can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-640L can securely access corporate networks. •.User-friendly.Setup.Wizard - Through its easy-to-use Web-based user interface, the DIR-640L lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s...

  • Page 9: Hardware Overview

    The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. Reset Button Pressing the Reset button restores the router to its original factory default settings. Power Receptor Receptor for the supplied power adapter. Power Button Turns the device On/Off. D-Link DIR-640L User Manual...

  • Page 10: Front

    A solid light indicates that the 2.4GHz wireless segment is ready. This LED blinks during wireless data WLAN LED transmission. A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during LAN LEDs (1-4) data transmission. * The USB port is currently inactive. D-Link DIR-640L User Manual...

  • Page 11: Installation

    • If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-640L User Manual...

  • Page 12: Wireless Installation Considerations

    1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

  • Page 13: Wall-Mount Kit Installation

    Step 4. Hang the router on the wall by sliding the tops of the screws through the holes on the bottom of the router and then slide to lock into position. Confirm the the router is firmly in place. D-Link DIR-640L User Manual...

  • Page 14: Hardware Setup

    3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the blue port labeled 1 on the back of your router. The router is now connected to your computer. DIR-640L POWER Computer D-Link DIR-640L User Manual...
  • Page 15 Please skip to page 13 to configure your router and use the manual setup procedure to configure your network and wireless settings. If you did not connect to the Internet, use the D-Link Setup Wizard (refer to page 15). D-Link DIR-640L User Manual...

  • Page 16: Configuration

    Step.1: The Welcome screen will appear. Click Next to continue. Step.2: The router will automatically detect your Internet connection type. Step.3: If the router could not automatically detect your connection type, select your connection type and click Next to continue. D-Link DIR-640L User Manual...
  • Page 17 If you selected PPTP, enter your PPTP settings supplied by your ISP and your PPTP username and password. Click Next to continue. If you selected L2TP, enter your L2TP settings supplied by your ISP and your L2TP username and password. Click Next to continue. D-Link DIR-640L User Manual...
  • Page 18 Click Next to continue. Step.4:.Create a name for your wireless network (SSID), create a password for your wireless network (Wi-Fi password), and then click Next to continue. Step.5:.Create a new password and then click Next to continue. D-Link DIR-640L User Manual...
  • Page 19 Cancel. The router will reboot. Please allow 1-2 minutes. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet. D-Link DIR-640L User Manual...

  • Page 20: Web-Based Configuration Utility

    Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (http://192.168.0.1 or use http://dlinkrouter.local.). Select Admin from the drop-down menu and the password should.be. left.empty. D-Link DIR-640L User Manual...

  • Page 21: Internet Connection Setup

    Use this tab to choose if you want to follow the simple steps of the Connection Setup Wizard, or if you want to set up your Internet connection manually. Internet Connection Wizard Click Next to begin the Setup Wizard. D-Link DIR-640L User Manual...
  • Page 22 Section 3 - Configuration STEP.1: Choose a password for your device. STEP.2: Choose the method you use to connect to the Internet, and follow the step-by-step instructions. D-Link DIR-640L User Manual...

  • Page 23: Manual Internet Connection

    Use this tab to choose either Static IP, DHCP, PPPoE, PPTP, L2TP, Dial-Up, Russian PPPoE, Russian PPTP, or Russian L2TP to configure your Internet connection. You may need to get this information from your ISP (Internet Service Provider). D-Link DIR-640L User Manual...

  • Page 24: Static (Assigned By Isp)

    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-640L User Manual...

  • Page 25: Dynamic (Cable)

    The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-640L User Manual...

  • Page 26: Pppoe (Dsl)

    The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-640L User Manual...

  • Page 27: Pptp

    MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DIR-640L User Manual...

  • Page 28: L2Tp

    MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DIR-640L User Manual...

  • Page 29: Dial-Up

    Enter the Primary and Secondary DNS Server Addresses. Assigned IP Address: If your ISP gave you a static IP address for your connections, enter it here. Extra Settings: Add any additional settings provided by your ISP here. D-Link DIR-640L User Manual...

  • Page 30: Russian Pppoe

    Select a Dynamic.IP or Static.IP if your WAN physical setting. IP Address Enter the IP address for your PPTP connection. Subnet Mask: Enter your PPTP subnet mask. DNS Addresses: Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only). D-Link DIR-640L User Manual...

  • Page 31: Russian L2Tp

    The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. DNS Addresses: Enter the Primary and Secondary DNS Server Addresses. D-Link DIR-640L User Manual...

  • Page 32: Russian Pptp

    The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. DNS Addresses: Enter the Primary and Secondary DNS Server Addresses. D-Link DIR-640L User Manual...

  • Page 33: Wireless Settings

    Section 3 - Configuration Wireless Settings On this page you can set up advanced options for your the wireless settings of your DIR-640L. Use this page you can choose if you want to follow the simple steps of the Wireless Setup Wizard, add a device using WPS, or if you want to set up your wireless connection options manually.

  • Page 34: Wireless Setup Wizard

    STEP.1: If you choose Automatically.assign.a.network.key click next to immediately complete the process. STEP. 2: Setup is completed, you should take note of your settings, especially your network name and pre-shared key. STEP.3: The router must now reboot. D-Link DIR-640L User Manual...
  • Page 35 STEP.2: Choose your wireless password. You will need this when connecting to the router from now on. STEP. 3: Setup is completed, you should take note of your settings, especially your network name and pre-shared key. STEP.4: The router must now reboot. D-Link DIR-640L User Manual...

  • Page 36: Wps Connection Wizard

    If you want to use the PIN method, simply enter your PIN and click Connect. If you want to use the PBC method click Connect and go to the next step. STEP. 3: Press the button on your device and wait for the connection to be established. D-Link DIR-640L User Manual...
  • Page 37 Section 3 - Configuration STEP.1: Choose Manual.to configure a device manually. STEP.2: Use the information in this window to configure your device. When your device is prepared, click ok. STEP.3: Your device is now ready. Save your settings.. D-Link DIR-640L User Manual...

  • Page 38: Manual Wireless Settings

    Input the IP Address of the router. (The default is 192.169.0.1) 802.11 Mode: Select the wireless mode from the drop-down menu. Enable Auto This setting can be selected to allow the DIR-640L to choose Channel Scan: the channel with the least amount of interference. Wireless Indicates the channel setting for the DIR-640L.
  • Page 39 WEP Key Length If you selected WEP security, select the length you would like (WEP): to set for your key. Authentification: Choose your authentification method from the drop-down menu. WEP Key 1: Enter your pass key. D-Link DIR-640L User Manual...
  • Page 40 Enter the port used for contacting the RADIUS server. RADIUS Server Shared Secret: Enter the shared secret of the RADIUS server. MAC Address Click to allow the RADIUS server to verify the devices MAC Authentification: address for connection. D-Link DIR-640L User Manual...

  • Page 41: Network Settings

    Reservations: Check this box to add a DHCP reservations list. Computer Name: Give an identity to the computer. IP Address: Enter the computer’s IP address. MAC Address: Enter the MAC address or Clone your PC’s address. D-Link DIR-640L User Manual...

  • Page 42: Vpn Settings

    VPN Settings On this page you can set up advanced options for a Virtual Private Network (VPN). The DIR-640L supports both IPSec and L2TP as the Server Endpoint. IPSec (Internet Protocol Security) is a set of protocols that can provide IP security at the network layer.

  • Page 43: Dynamic Ipsec Vpn

    STEP.2: Give your VPN profile a name, and click Next. STEP.3: Enter the Local Subnet/Mask and the pre-shared key for your VPN, and click Next. STEP.4: Click Next to restart the router. You have now completed the VPN Wizard Setup. D-Link DIR-640L User Manual...

  • Page 44: Ipsec Vpn

    STEP.2: Give your VPN profile a name, and click Next. STEP.3: Enter the Local Subnet/Mask and the pre-shared key for your VPN, and click Next. STEP.4: Click Next to restart the router. You have now completed the VPN Wizard Setup. D-Link DIR-640L User Manual...

  • Page 45: Pptp Vpn

    STEP.3: Choose and username and password for your VPN, and click Next. STEP.4: Enter a VPN server IP and remote IP range, and click Next. STEP.4: Click Next to restart the router. You have now completed the VPN Wizard Setup. D-Link DIR-640L User Manual...

  • Page 46: L2Tp Vpn

    STEP.3: Choose and username and password for your VPN, and click Next. STEP.4: Enter a VPN server IP and remote IP range, and click Next. STEP.4: Click Next to restart the router. You have now completed the VPN Wizard Setup. D-Link DIR-640L User Manual...

  • Page 47: Vpn Manual Settings

    VPN Manual Settings On this page you can set up advanced options for a Virtual Private Network (VPN). The DIR-640L supports both IPSec and L2TP as the Server Endpoint. IPSec (Internet Protocol Security) is a set of protocols that can provide IP security at the network layer.

  • Page 48: Ipsec Settings

    Section 3 - Configuration IPSec Settings The DIR-640L supports IPSec as the Server Endpoint. IPSec (Internet Protocol Security) protocols can provide IP security at the network layer. IPSec: Check this box to enable IPSec. Name: Enter a name for your VPN tunnel.
  • Page 49 Use this area to choose the encryption and authentification List: methods for IPSec proposals by choosing from the drop-down menus. IPSec Lifetime: Enter the amount of time in seconds that the Phase 2 keys should last. D-Link DIR-640L User Manual...

  • Page 50: Pptp/L2Tp Settings

    Choose PAP, CHAP, or MSCHAP.v2 for your authentification. MPPE Encryption Choose either RC4, None, 40.bit, or 128.bit to determine the Mode: strength level of your authentification. Extended If you wish to use extended authentification, choose a group Authentification: from the drop-down menu. D-Link DIR-640L User Manual...

  • Page 51: Gre Settings

    Select an IP address to access the tunnel remotely. Remote Local Enter the remote local (LAN) subnet and mask. LAN Net/Mask: (ex. 192.168.0.0/24) Key: Enter the key for the tunnel. TTL: Enter the time to live for packets delivered. D-Link DIR-640L User Manual...

  • Page 52: Advanced

    The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-640L User Manual...

  • Page 53: Application Rules

    These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-640L. If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic.

  • Page 54: Qos Engine

    The rule applies to a flow of messages whose WAN-side IP address falls within the range set here. Remote Port: The rule applies to a flow of messages whose WAN-side port number is within the range set here. D-Link DIR-640L User Manual...
  • Page 55 Section 3 - Configuration Priority: The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent). Schedule: Choose a schedule for the QoS rule. D-Link DIR-640L User Manual...

  • Page 56: Network Filter

    To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click << to copy that MAC Address. Clear: Click to remove the MAC address. D-Link DIR-640L User Manual...

  • Page 57: Web Filter

    Enable URL filtering by checking this box. Enable Rule: Click to enable or disable a rule. Website URL/ Enter the keywords or URLs that you want to allow or Domain: block. Click Save.Settings. Schedule: Choose a schedule for the rule. D-Link DIR-640L User Manual...

  • Page 58: Firewall Setting

    Firewall Setting A firewall protects your network from the outside world. The DIR-640L offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications.
  • Page 59 Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second box. New Schedule: Click this button to create a new schedule. D-Link DIR-640L User Manual...

  • Page 60: Routing

    A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-640L User Manual...

  • Page 61: Advanced Network Settings

    ™ click on Enabled. UPnP provides compatibility with networking equipment, software and peripherals. Enable WAN Ping Checking the box will allow the DIR-640L to respond Respond: to pings. Unchecking the box may provide some extra security from hackers. WAN Port Speed: Choose your WAN port speed from the drop-down menu.

  • Page 62: Ipv6

    Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. Choose your IPv6 connection method from the drop-down menu under the IPv6 Connection Type. D-Link DIR-640L User Manual...

  • Page 63: Static Ipv6

    Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Enter the IPv6 address lifetime (in seconds). Lifetime: D-Link DIR-640L User Manual...

  • Page 64: Dhcp

    Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Select Stateful or Stateless autoconfiguration. Autoconfiguration Type: Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-640L User Manual...

  • Page 65: Pppoe

    Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-640L User Manual...

  • Page 66: Ipv6 Over Ipv4 Tunneling

    Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-640L User Manual...

  • Page 67: To 4 Tunneling

    Displays the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-640L User Manual...

  • Page 68: 6Rd

    Displays the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-640L User Manual...

  • Page 69: Link-Local Connectivity

    Section 3 - Configuration Link-Local Connectivity My IPv6 Connection: Select Link-Local.Only from the drop-down menu. LAN IPv6 Address Settings: Displays the IPv6 address of the router. D-Link DIR-640L User Manual...

  • Page 70: Ipv6 Firewall

    Select the protocol of the firewall port (All, TCP, UDP, or ICMP). Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second box. D-Link DIR-640L User Manual...

  • Page 71: User Group

    The User Group feature allows you to select an authentification database to store a group of user settings User Settings: Here you will find a list of Authetification databases you have created. Authentification Choose a database from the drop-down menu and choose database: Edit to make changes. D-Link DIR-640L User Manual...

  • Page 72: Maintenance

    Access: Enter the IP address used to access the DIR-640L. Remote Admin Enter the port number used to access the DIR-640L is used in Port: the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-640L and 8080 is the port used for the Web Management interface.

  • Page 73: Snmp

    Section 5 - Tools SNMP The DIR-640L allows you to use the Simple Network Management Protocol for easy management of your network. SNMPLocal: Enable this option to allow local SNMP management. SNMPLocal: Enable this option to allow remote SNMP management.

  • Page 74: Time

    To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set.Time. You can also click Copy.Your.Computer’s.Time.Settings to synch the date and time with the computer you are currently D-Link DIR-640L User Manual...

  • Page 75: Syslog

    The address of the SysLog server that will be used to send the Address: logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DIR-640L User Manual...

  • Page 76: Email Settings

    Selecting this option will send the logs via email according to schedule. Schedule: This option is enabled when On.Schedule is selected. You can select a schedule from the list of defined schedules. To create a schedule, go to Maintenance.>.Schedules. D-Link DIR-640L User Manual...

  • Page 77: System

    Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device: Click to reboot the router. D-Link DIR-640L User Manual...

  • Page 78: Firmware

    You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com.

  • Page 79: Dynamic Dns

    Enter the Host Name that you registered with your DDNS service provider. Username or Key: Enter the Username or key for your DDNS account. Password or Key: Enter the Password or key for your DDNS account. D-Link DIR-640L User Manual...

  • Page 80: System Check

    The Ping Test is used to send Ping packets to test if a Address: computer is on the Internet. Enter the IP address that you wish to Ping and click Ping. Ping Result: The results of your ping attempts will be displayed here. D-Link DIR-640L User Manual...

  • Page 81: Schedule

    End Time: Enter an end time for your schedule. Schedule Rules The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the List: schedule. D-Link DIR-640L User Manual...

  • Page 82: Status

    Device Info This page displays the current information for the DIR-640L. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.

  • Page 83: Log

    Download: This option will save the router log to a file on your computer. Clear Logs: Clears all of the log contents. Link To Log Settings: This option will jump to Tools > Syslog settings. D-Link DIR-640L User Manual...

  • Page 84: Statistics

    Statistics The screen below displays the Traffic.Statistics. Here you can view the amount of packets that pass through the DIR-640L on both the WAN, LAN ports and both the 802.11n/g and 802.11n/a wireless bands. The traffic counter will reset if the device is rebooted.

  • Page 85: Active Session

    The Active Session page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-640L User Manual...

  • Page 86: Lan Clients

    Section 6 - Status LAN Clients This page will list the LAN clients currently connected to your network. D-Link DIR-640L User Manual...

  • Page 87: Routing

    Section 6 - Status Routing This page will display your current routing table. D-Link DIR-640L User Manual...

  • Page 88: Vpn

    Section 6 - Status This page is where the router displays information on the the current VPN tunnels. D-Link DIR-640L User Manual...

  • Page 89: Ipv6

    Section 6 - Status IPv6 The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. D-Link DIR-640L User Manual...

  • Page 90: Support

    Section 6 - Status Support Click these links to get further instruction when configuring your DIR-640L Wireless N300 Cloud VPN Router. D-Link DIR-640L User Manual...

  • Page 91: Troubleshooting

    1..Why.can’t.I.access.the.web-based.configuration.utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
  • Page 92 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
  • Page 93 • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter.(or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: . ping.[url].[-f].[-l].[MTU.value] Example: ping.yahoo.com.-f.-l.1472 D-Link DIR-640L User Manual...
  • Page 94 • Open your browser, enter the IP address of your router (http://192.168.0.1) and click OK. • Enter your username (admin) and password (should be left empty). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual.Configure. D-Link DIR-640L User Manual...

  • Page 95: Wireless.basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

  • Page 96: What Is Wireless

    Why.D-Link.Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How.does.wireless.work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B.
  • Page 97 Who.uses.wireless?. Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...

  • Page 98: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.

  • Page 99: Wireless Modes

    • Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more DIR-640L wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.

  • Page 100: Networking.basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 101: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step.5 Click OK twice to save your settings. D-Link DIR-640L User Manual...

  • Page 102: Technical.specifications

    Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country’s regulation 3 The DIR-640L does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link DIR-640L User Manual...

  • Page 103: Gpl.code.statement

    WRITTEN OFFER FOR GPL AND LGPL SOURCE CODE Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.
  • Page 104 To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. D-Link DIR-640L User Manual...
  • Page 105 A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. D-Link DIR-640L User Manual...
  • Page 106 Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. D-Link DIR-640L User Manual...
  • Page 107 If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. D-Link DIR-640L User Manual...
  • Page 108 Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. D-Link DIR-640L User Manual...
  • Page 109 If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. D-Link DIR-640L User Manual...
  • Page 110 Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. D-Link DIR-640L User Manual...
  • Page 111 Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. D-Link DIR-640L User Manual...
  • Page 112 License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. D-Link DIR-640L User Manual...
  • Page 113 D-Link DIR-640L User Manual...
  • Page 114 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. D-Link DIR-640L User Manual...
  • Page 115 Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-640L User Manual...

  • Page 116: Contacting.technical.support

    • Hardware Revision (located on the label on the bottom of the router (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.

  • Page 117: Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 118 Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.
  • Page 119 D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
  • Page 120 FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.
  • Page 121 • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. For.detailed.warranty.information.applicable.to.products.purchased.outside.the.United.States,.please.contact.the. corresponding.local.D-Link.office. D-Link DIR-640L User Manual...

  • Page 122: Registration

    Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. D-Link DIR-640L User Manual...

Table of Contents