Manual Wireless Setup - D-Link DIR-605L User Manual

Section 3 - Configuration
Wi-Fi Protected
To enable WPS (WCN 2.0), check the Enable box. Click either
Setup: Generate.New.PIN or Reset.PIN.to.Default, and then configure
the Wi-Fi settings below. Please see the Setting Up Wi-Fi
Protection (WCN 2.0 in Windows Vista®) section later in this
manual for detailed configuration information.
Enable Wireless: Check the box to enable the wireless function. If you do not
want to use wireless, uncheck the box to disable all the wireless
functions.
Wireless Network
Service Set Identifier (SSID) is the name of your wireless
Name: network. Create a name using up to 32 characters. The SSID is
case-sensitive.
Enable Check this box to allow the DIR-605L to select the channel with
Auto Channel: the least amount of interference automatically.
Wireless Channel: Indicates the wireless channel for the router. By default the
channel is set to 6. The Channel can be changed to fit the
channel setting to customize your wireless network. If you
enabled Auto Channel Selection, this option will be greyed out.
Transmission
Use the drop-down menu to select the appropriate Transmission
Rate:
Rate in Mbits per second. Many users will want to use the default
setting, Best (automatic).
WMM Enable:
Enable Wi-Fi Multimedia to enjoy basic quality of service
features. WMM prioritizes traffic according to four access
categories: voice, video, best effort, and background.
Enable Hidden
Check this option if you would not like the SSID of your wireless
Wireless:
network to be broadcasted by the DIR-605L. If this option is
checked, the SSID of the DIR-605L will not be seen by Site Survey
utilities so your wireless clients will have to know the SSID of
your DIR-605L in order to connect to it.
D-Link DIR-605L User Manual

Manual Wireless Setup

21