Advertisement
Live Mode Programs
Prg. #
Program Name
750
LM Notched Pan
751
LM Talking MW
752
LM Synth Sliders
753
LM Hi Resonance
754
LM Amp Mod Osc
755
LM Notch/Shaper
756
LM Twin Peaks
757
LM Air Filter
758
LM Parametric
759
LiveMode Default
Live Mode also includes two Live Mode Keymaps at 197 and 198 (Left and Right respectively).
Usage Notes
To use the programs, you must hold down a key (C4, unless you're going for a special effect) for the inputs to
run through V.A.S.T. An alternative way to trigger the sound is to edit the Control Setup found in the MIDI
XMIT page. For example, using Panel Switch 2 (PSw 2), changing the switch type to Note Toggle, and using
C4 as the destination. This allows you to turn the program on/off via a button press and also keeps sound
sustaining while the button is on. This obviously only works for owners of the keyboards, not racks, but the
idea transfers to any MIDI controller. Keep in mind, that if you change the live mode program, you need to
restrike a key (or Button) for the signal to go through that program.
You can also edit the live mode keymap to ignore release if you only want to use the keyboard to activate Live
Mode.
You cannot sample and use live mode together, the two functions use the same components.
910309
PWheel>Reverse FX, Data>Pan LFO Rate, B> Notch Freq, C>Width
Data>Dist, MW>Filter Freq, B> Tremolo Rate
PWheel>Reverse FX, MW>LFO Depth, Data>Attk Rate, B>Release
Rate, C> LFO Rate, D+Keytracking>Filter Freq., E> Resonance,
F>Flange Level, G>Delay Feedback, H>Flange Delay Wet/Dry
Data> Filter Freq., B>LFO Rate, C>Resonance
Data>Amp Mod Depth, B>Osc Pitch, C>Wrap LFO Rate,
MW>Reverse FX, G>Flange Level
Data> Filter, Shaper, MW>LFO Rate
Data, MW>Filter Freq., B>Width, C>Separation
Data> Filter Freq., MW>Resonance, B>Separation LFO Rate
Data> Filter Freq., MW>EQ Peak Width, B>Para EQ Amp
Stereo Default, Slider H controls the Digitech Effect Wet/Dry Mix
Controller Assignments
Live Mode Programs
3
Advertisement
