Table of Contents
Advertisement
System connection e
System connection e
• Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
• The cables should be secured with tape or a similar securing method to prevent any obstructions while
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,
or brake pedal, accidents may result.
• If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire
insulating method around the connection to insulate it. If the connection is not insulated, fire or
accidents may result.
Tip
• Install and connect all of the peripheral units before connecting them to the main unit.
• Do not remove any of the protective caps (RCA, etc.) unless in use.
DIN CABLE
(Supplied with CD changer)
xample
xample
1
MAIN UNIT
16P
13P
TO EARTH
13P
2P
TO EARTH
POWER CONNECTOR CABLE
(Supplied with CD changer)
- 6 -
ANTENNA PLUG
TO VEHICLE-SIDE
CONNECTOR
2
INTERCONNECTING
CABLE
(Power and speaker
connector)
DIGITAL OUT
(Do not remove cap)
CH3083
(sold separately)
Advertisement
Table of Contents
