Machine Storage - Bissell 1697 User Manual

O
peration
Stain removal (continued)
4. Use your BISSELL deep cleaner as a precleaner.
With one of the tools attached to the flex hose,
set the ReadyTools dial to tools. Spray the
area with cleaning solution and allow the
BISSELL deep cleaning formula to penetrate for 3-5
minutes.
5.
Once the precleaning is complete, use the
attached tool to gently scrub the stain with
back and forth strokes.
6. Allow to dry. Some difficult stains may require
a second treatment.
M
aintenance and care
Machine care
for best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
Turn power switch OFF ( 0 ). Unplug the
1.
machine and wrap the power cord.
2.
After emptying the water tank, rinse it out at a
faucet with running hand hot tap water, taking
care to clean underneath the heavy duty bladder,
and all around it. Clean out lint screen.
3.
Replace the water tank on the machine.
4. Wipe the machine's exterior with a soft cloth.
5.
After carpet is dry, vacuum again to remove
hair and fuzz.

Machine storage

once your cleaning is complete, make sure the
water tank is emptied and rinsed out. put the unit
away in a closet or basement for the next use.
note: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
freezing will damage internal components
and void the warranty.
12
w w w . b i s s e l l . c o m
ug120-4002_1697E_707.indd 12
WaRnInG:
to reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
9/8/08 10:10:16 AM