Table of Contents
Advertisement
Sonic Immersion System Dealer Installation Guide
1.
Take the hinge mounting bracket connected to the speaker
(P/N 01564-14) and place it on the panel with the top
triangular portion of the hinge butting up against the lower
edge of the overhanging spa lip.
2.
Remove the protective caps from the hinge screw holes and
using a center punch mark the locations for the screws.
3.
Locate the four mounting screws that come with the hinges.
Using an electric screwdriver, attach the hinges to the spa
panel.
4.
Replace the protective caps over the hinge screws.
38
To prevent wood panels from splitting,
drill pilot holes before installing the
hinges.
- Quick Links:
- Removing Panels
Hide quick links:
Advertisement
Table of Contents
