Table of Contents
Advertisement
Sonic Immersion System Dealer Installation Guide
3.
Reattach panel to spa.
4.
Connect antenna, main harness and amplifier to CD player as
described in CD player owner's manual. Connect power
supply cable (long branch of main harness) to power supply
connector on CD player. Connect Channel 1 preamp stereo
cables (RCA cable) to FRONT connectors on the CD player
and the Channel 2 cables to the REAR connectors on the CD
player.
5.
Then slide CD player into sleeve and lock in position.
Installing the Satellite Speakers
Locate the panel where you will install the speakers.
Connecting the preamp cables (RCA
cables) in this manner will allow the
front and rear faders to increase or
decrease the sound level of the sub-
woofer or satellite speakers.
37
Advertisement
Table of Contents
