Table Of Contents; Important Information - Numark CD MIX-2 Operating Manual

Professional cd mixing console
Hide thumbs Also See for CD MIX-2:
Table of Contents

Advertisement

CD MIX-2
Description of the Features
Operation

IMPORTANT INFORMATION...

Please read this entire manual before connecting this unit to your system.
For optimum performance:
a) Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your
warranty. In normal use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty
environment) consult a professional technician.
b) Always make sure that AC power is OFF while making any connections.
c) Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs
and jacks are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your
speakers. Make the input and output connections with readily available low-capacitance stereo cables. Quality cable
makes a big difference in audio fidelity and punch. See your Numark dealer or an electronics or audio specialist store
if you are not sure which cables to get.
d) Never attempt to make any adjustments or repairs other than those described in this manual. Take the unit to your
dealer or to an authorized Numark Service Center.
e) ALWAYS remember: "TURN AMPS ON LAST AND OFF FIRST". Begin with master faders or volume controls on
minimum and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This
prevents transients which may cause severe speaker damage.
f)
Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to
amplifier clipping.
g) Avoid amplifier "clipping" at all costs: this occurs when the red LEDs (usually on the front panel of most professional
power amplifiers) start flashing. "Clipping" is when the power amplifier is distorting and working beyond it's limits.
Amplifier distortion is THE major cause of speaker failure.
h)
To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of
water or anything wet on top of the unit!
©2001 Numark Industries

TABLE OF CONTENTS

- The Leader in DJ Technology
- 5 -
2
4
5
6
7
8
9
10
11
11
12
13
16
18
18
19
20
http://www.numark.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents