Numark PPD01 User Manual
  1. Manuals
  2. Brands
  3. Numark Manuals
  4. Music Mixer
  5. PPD01
  6. User manual

Numark PPD01 User Manual

24-bit digital mixer
Hide thumbs Also See for PPD01:

Advertisement

Table of Contents

USER'S MANUAL
©2002
Industries
http://www.numark.com

Advertisement

Table of Contents
loading

Related Manuals for Numark PPD01

Summary of Contents for Numark PPD01

  • Page 1 USER’S MANUAL ©2002 Industries http://www.numark.com...

  • Page 2: Safety Instructions

    Damage Requiring Service - Only qualified personnel should service this product. If you have any questions about service please contact Numark at the number(s) shown on the back cover of this manual.

  • Page 3: Power Supply

    Quality cable makes a big difference in audio fidelity and punch. See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get.
  • Page 4 Several innovative features are included to ensure maximum results from your performance. Once again, congratulations and thank you for making the PPD01 your choice in professional DJ Mixers.
  • Page 5 47kΩ input impedance OUTPUTS: Balanced Line: 11V rms max Unbalanced Line: 5.5V rms max Headphone: 0.5 watt into 47Ω Distortion: 0.005% typical ©2002 Numark Industries TABLE OF CONTENTS SIGNAL TO NOISE RATIOS* (Full Mixing Path): Line: Microphone: Phono: unbalanced FREQUENCY RESPONSE: Line:...

  • Page 6: Front Panel Features

    PPD01 FRONT PANEL FEATURES - The Leader in DJ Technology ©2002 Numark Industries - 6 - http://www.numark.com...
  • Page 7 Note: This fader is user replaceable if it should ever wear out. Simply remove the facepanel and then remove the screws holding it in position. Replace the fader with a quality authorized replacement from your local Numark retailer. 10. “Slope Knob” (Input Fader Curve Style Control): The position of this knob determines the rate of volume level increase of the fader.
  • Page 8 Note: This fader is user replaceable if it should ever wear out. Simply remove the facepanel and then remove the screws holding it in position. Replace the fader with a quality authorized replacement from your local Numark retailer. 19. “MODE and MODE Display” (Crossfader Function Control and Display): This toggle switch changes crossfader modes be left-right movement.

  • Page 9: Rear Panel Features

    12. Power Switch: Use this switch to turn on the mixer after all input devices are already connected to prevent damage to your equipment. Turn the mixer on before you turn on amplifiers and turn of amplifiers before you turn off the mixer ©2002 Numark Industries Higher audio fidelity is maintained from these outputs.

  • Page 10: Quick Setup Diagram

    Connect the stereo outputs to the power amplifier(s) and/or audio sources. Plug your mixer and other devices into AC power. ©2002 Numark Industries Switch everything on in the following order. audio input sources (i.e. turntables or CD players) your mixer...
  • Page 11 At the other extreme, the cuts move towards their respective endpoints. Different cut points will allow the user to double their “crabbing” or “chirping” rate, or find a comfortable offset cut-in point. ©2002 Numark Industries - The Leader in DJ Technology - 11 -...

  • Page 12: Limited Product Warranty

    NUMARK dealer and continuing for the following period of time after that date for (1) Year.

Table of Contents